Dr. Gamal El-Din Ali Abouelmagd 

 

 

 

Gender:              Male

Nationality:         Egyptian

Date of birth:      21/6/1958

Position:             1- Full Professor of Material Science & Testing

                          2- Vice president of central Minia University press

Marital Status:     Married (3 children)         

Job Title:            Professor of Material Science and Testing

Address:            Production Engineering and Design department, Faculty of Engineering, Minia, University, (61111) Minia, EGYPT.

City:                  Minia

Zip code:           61111

Country:            Egypt

E-mail:              g_magd@yahoo.com  

 

 

 

EDUCATIONS

1-     B.Sc in Mechanical Engineering, Minia University, Minia, Egypt (1981).

2-     M.Sc in Mechanical Engineering, Minia University, Minia, Egypt (1987). Thesis title:  “Effect Metal Sheet Properties on their Drawability to Box-Shaped Components”.

3-     Ph. D in Mechanical Engineering, Minia University- Technical Aachen University (Germany-Egypt Channel System), (1992). Dissertation title: “ Creep Behaviour of Hot Isostatically Pressed Ti Al6 V4 Powder Alloy”.

 

 

 

JOB HISTORY

1-     Administrator , from 30/12/1981 up to 14/11/1987, Production Engineering and Design Department, Minia University, Minia, Egypt.

2-     Assistant lecturer, from 15/11/1987 up to 24/2/1992, Production Engineering and Design Department, Minia University, Minia, Egypt.

3-     Assistant Professor, from 25/6/1991 up to 29/6/1998, Production Engineering and Design Department, Minia University, Minia, Egypt.

4-     Associate Professor, from 30/6/1998 up to 27/9/2004, Production Engineering and Design Department, Minia University, Minia, Egypt.

5-     Professor, from 28/9/2004 tell now, Production Engineering and Design Department, Minia University, Minia, Egypt.

6- Visiting professor in Material Science Institute, Technical university of Aachen, Germany from April 1999 to October 1999.

 

 

 

TEACHING EXPERIENCE, SINCE 1981 TILL NOW

a-               Under Graduate Courses

1- Engineering Drawing.

2-  Mechanical Engineering Drawing.

3-  Production Engineering.

4-  Material Science and Testing.

5-  Strength of Materials and Stress Analysis.

6-  Theory of Machines.

7-  Machine Tool Design.

 

b-               Post Graduate Courses

1-  Mechanical Metallurgy.

2-  Powder Metallurgy.

3-  Creep behavior of Metals.

4-  Materials Technology.

 

c-      B. SC Projects

1-     Powder metallurgy.

2-     Reactive hot isostatic pressing.

3-     Inter-metallic components.

4-     Creep of high temperature resistant materials.

5-     Corrosion and corrosion prevention.

6-     Heat treatment of different alloys.  

7-     Design and manufacturing torsional creep testing machine.

8-     Foaming Materials.

9-     Design and manufacturing sawing machine.

 

 

 

OTHER TEACHING EXPERIENCE

 

Industrial Education College, Beni-Suief, Ministry of Higher Education, Egypt  (Manufacturing processes I and II, and Materials Technology).

 

 

 

TRAINING COURSES

1-     Manufacturing Processes.

2-     Production Engineering (Machining, Forming, Welding).

3-     Material Science and Testing.

4-    Strength of Materials and Stress Analysis.

5-    Design of Machine Elements.

6-    Mechanical Metallurgy.

7-    Powder Metallurgy.

8-    Creep behavior of Metals.

9-    Materials Technology.

 

 

 

EXAMINER OF THE FOLLOWING M. Sc AND Ph. D THESIS  

1-    M. Sc thesis title, “Effect of Thermo-mechanical Treatment on Tensile and Creep Properties of Steel 304”.

2-    M. Sc thesis title,  “Mechanical and Corrosion Properties of Aluminium Metal Matrix Composites”.

3-   Ph. D thesis title, “Tribological Properties of Different P/M Metal Matrix Composites for Replacement of Asbestos Brakes”.

 

 

 

CONTRIBUTION AND DEVELOPMENT OF RESEARCH LABS 

 

1-   Foundation of Metallographic Examination Lab.

2-   Foundation of Stress Corrosion and Stress Cracking Lab.

3-    Development of Creep Testing Lab.

 

 

 

CONTRIBUTION IN THE FOLLOWING FIELDS

 

I have a contribution in the following:

 

1-     Collaboration program between Minia University and both Technical Aachen University and Central Research Center, Juelich, Germany in the filed of Powder Metallurgy Manufacturing and characterization of Metal Matrix Composites produced by P/M process.

2-     Consultation for projects aiming at industry development through the consultations unit in Minia university.

 

 

 

PARTICIPATION IN INTERNATIONAL CONFERENCES

 

1- Fifth International Conference on Development in Production Engineering, Design and Control, Alexandria University, Alexandria, Egypt, Dec., 27- 29, (1992).

2- Fourth International Conference in Production and Design for Development , Ain- Shams University , Cairo,  Dec., 27- 29, (1993)

3- First International Conference on Mechanical Engineering on Advanced Technology for Industrial Production, Dept of Mechanical Engineering, Faculty of Engineering MEATIP I, Assiut Univ. Assiut , Egypt, March, (1994).

4- First International Conference on Mechanical Engineering , Mansoura Univ., Mansoura, Egypt, March, 28- 30, (1995).

5- Second International Conference on Heat Exchanger, Boilers and pressure Vessels, Atomic Energy Authority, Alexandria, Egypt,  April 22- 23, (1995).

6- First Jordanian Mechanical Engineering International Conference, Faculty of Engineering and Technology, Jordan, June, 25- 28, (1995).

7- International Conference on Advances in Materials and Processing Technology , AMPT’97, University of Minho, Guimaraes, Porugal, July 22- 26, (1997).

8- Second International Conference on Quality and Reliability, Hong Kong,  (1997).

9- Second International Conference on Mechanical Engineering Advanced Technology for Industrial Production, MEATIP I, Assuit University, Assuit, Egypt, March, 2-4, (1999).

10- International Conference in Advances in Materials Processing Technology, AMPT’99, Dublin City University, Dublin, IRELAND, (1999).

11- Fifth International Conference on Measurement and Control of Granular Materials , MCGM 2000, XI’an, P.R. China, vol. 1, August, 21- 23, (2000).

12- First Symposium on Heat Treatment of Metals And Alloys, 1 HT 2001, Tabbin Institute for Metallurgical Studies, Cairo, Egypt,  Nov., 3-5, (2001).

13- International Conference in Advances in Materials Processing Technology, AMPT 2003, Dublin City University, Dublin, IRELAND, 8-11 July (2003).

14- Third Minia International Conference for Advanced Trends in Engineering, MICATE 2005, Minia University, Minia, Egypt, 3-5 April (2005). 

 

 

 

LIST OF PUBLICATIONS

1-     G. Abouelmagd and H.P Buchkremer, D. Stover and E. El-Magd, “Mechanical Properties of a TiAl6V4 Processed by Powder Metallurgy”, Journal of Material Processing Technology, Vol. 37, pp. 583-597, (1993).

2-     G. Abouelmagd and A.M. Abd El-Mageed, “ Crack Propagation Studies In Opening And Mixed Mode In Cyclic Loading”, Proc. of 5 th. Int. conf. on Development in Production Engineering and Design,PEDAC’92, Univ. of Alexandria, Vol. 1, pp. 175-182, Dec. 27-29, (1992).

3-     G. Abouelmagd and A.M. Abd El-Mageed, “ Internal And Friction Stress Of Carbon Steel Under Creep Conditions”, Proc. of 4 th. Int. conf. on Production Engineering and Design For Development, PEDD' 93, Ain Shams Univ., Cairo, Vol. 1, pp. 83-94, Dec. 27-29, (1993).

4-     G. Abouelmagd, A.H. Mohamed and A.M. Abd El-Mageed,” Study Of Stress Corrosions Time On Tensile  Properties Of Low Carbon Steel”, Proc. of 1 st. Int. conf. on Mechanical Engineering Advanced Technology For Industrial Production, MEATIP 1, Assiut Univ., Assiut, Vol. 1, pp. 389-397, Dec. 27-29, (1994).

5-     G. Abouelmagd, A.H. Mohamed and A.M. Abd El-Mageed,” Effect Of Copper Content On Stress-Corrosion And Tensile Properties Of Al-Cu Alloy”, Proc. of 1 st. Jordan Mechanical Engineering Conference, Univ. of  Jordan and Jordan Engineering Association, Amman, Vol. 2, pp. 751-759, June 25-28, (1995).

6-     G. Abouelmagd, A.H. Mohamed and A.M. Abd El-Mageed,”Effect Of Overloading Conditions On Rotating Bending Fatigue Life”, Proc. of 2 nd. Int.  Conf. on Heat Exchangers, Boilers & Pressure Vessels, HEB’95, Atomic Energy Authority, Alexandria, Vol. 2, pp. 577-585, April  22-23, (1995).

7-     G. Abouelmagd, ” Influence Of Alloying Elements On Tensile And Creep Behaviour Of Pure Aluminium”, Bulletin of the Faculty of Engineering, Assiut University, Vol. 25, No. 1, pp. 15-23, January, (1997).

8-     G. Abouelmagd and  A.H. Mohamed,”Effect Of Titanium Additions On Creep And Corrosion Behaviour Of Al-4.5 Cu Alloy”, Proc. of the Conf. on Advances in Materials and Processing Technologies, AMPT’97, Univ. of Minho, Guimaraes, Portugal, Vol. 1, pp. 126-131, July 22-26, (1997).

9-     G. Abouelmagd,” Effect Of Stress And Temperature Changes On The Creep Behaviour Of Carbon Steel”, Proc. of the Conf. on Advances in Materials and Processing Technologies, AMPT’97, Univ. of Minho, Guimaraes, Portugal, Vol. 1, pp. 62-67, July 22-26, (1997).

10- A.M. Abd El-Mageed and G. Abouelmagd,”Creep Behaviour And Sequential Creep- Fatigue Interaction Of Carbon Steel”, Proc. of the Conf. on Advances in Materials and Processing Technologies, AMPT’97, Univ. of Minho, Guimaraes, Portugal, Vol. 2, pp. 699-704, July 22-26, (1997).

11- G. Abouelmagd and A.M. Abd El-Mageed, “Characterisation Of P/M Aluminium Composites Reinforced With Fe, Ni And Ti”, Proc. of 5 th. Int. conf. on Measurement and Control of Granular Materials, MCGM2000, XI’AN, P.R. China, Vol. 1, pp. 69-76, August 21-23, (2000).

12- G. Abouelmagd, Y.M.Ismaile and E. El-Magd, ”Dependence Of Microstructure And Mechanical Properties Of Aluminium Alloy Aa7075 On Precipitation Hardening Treatment”, Proc. of 1 st. Symposium on Heat Treatment of Metals and Alloys, Cairo, Egypt, pp. 59-70, 3-5 Nov., (2000).

13- G. Abouelmagd, A.A. Ibrahim, M.M. Abd El- Mageed and A.M.Abd El-Mageed, ” Ffect Of Thermo-Mechanical Treatment On Tensile And Creep Behavior Of Stainless Steel 304”, Proc. of 6 th. International Conf. on Production Eng. and Design for Development, PEDD 6, Ain Shams Univ. Cairo, Egypt Vol. 2, pp. 679-692, 12-14 Feb., (2002).

14- A.H. Mohamed and G. Abouelmagd,” Effect Of Solution Annealing Conditions On Corrosion And Wear Resistance Of Precipitated Hardened Aluminium Alloy Aa7075”, Bulletin of The Faculty of Eng., Minia Univ., Vol. 21, No. 1, pp. 1-8, Oct. (2002).

15- G. Abouelmagd,” Optimization Of Creep Behaviour For 2024 Aluminium Alloy By Solution Heat Treatment”, Proc. of 3 rd. Assiut University International Conf. on Mechanical Eng. and Advanced Technology for Development, MEATIP 3 02, Assiut, Egypt, , Vol. 1, pp. 1-10, 24-26 Dec. (2002).

16- G. Abouelmagd and A.M. Abd El-Mageed, “Characterization Of Creep Behaviour Under Varying Stresses For X6 Cr Ni 18 11 Steel Based On Internal Back Stress”,  Proc. of 3 rd. Assiut University International Conf. on Mechanical Eng. and Advanced Technology for Development, MEATIP 3 02, Assiut, Egypt, Vol.1, pp. 235-243, 24-26 Dec. (2002).

17- G. Abouelmagd,” Hot Deformation And Wear Resistance Of P/M Aluminium Metal Matrix Composites “, Proc. of the International  Conf. on Advanced in Materials and Processing Mechanical Technologies, Dublin City Univ., Dublin, Ireland, Vol. II, pp. 1702-1711, 8-11 July  (2003). Also it is published in Journal of Materials Processing Technology 155-156, pp. 1395-1401, (2004).

18- G. Abouelmagd,” Reactive Hot Isostatic Pressing (Rhip) Of Aluminium Metal Matrix Composites”,  Journal of Engineering Science, Assiut University, Vol. 32, No. 3, pp. 1169-1181, July (2004).

19- G. Abouelmagd and A.M. Abd El-Mageed, “ Prediction Of Tensile Creep Behaviour For X6 Cr Ni 18 11 Steel Based On Torsion Creep”,  Journal of Engineering Science, Assiut University, Vol. 32, No. 3, pp. 1199-1210, July (2004).

20- G. Abouelmagd and A.M. Abd El-Mageed, “Mechanical and Wear Properties of P/M Aluminium Composites Reinforced by Different Additions, Proceeding of The International Conference for Scientific Research and Technological Development, Reiad, Kindom of Saudi Arabia, 4-7 April , 2004.

21- G. Abouelmagd and M.M.Moustafa,” Chracterisation of Foaming Materials”, to be bublished.

22- G. Abouelmagd and A.M. Abd El-Mageed, “Creep Response under Cyclic Temperature and Stress" to be bublished.